RPS Configuration
https://docs.kernel.org/networking/scal ... figuration
RSS Configuration
https://docs.kernel.org/networking/scal ... figuration
For upload from client need additional tunning XPS as I remember
Search found 866 matches
- 22 Mar 2024, 17:32
- Forum: General
- Topic: accel-ppp as pppoe client
- Replies: 3
- Views: 1784
- 21 Mar 2024, 19:02
- Forum: PPPoE
- Topic: cannot add pppoe interface in cli
- Replies: 2
- Views: 952
Re: cannot add pppoe interface in cli
Hi, hashbang. For different instance you have to use different [CLI]tcp=127.0.0.1:port and use this port as arg for accel-cmd For instance 1: accel-cmd -p <Instance 1 port> pppoe interface add ens5f1.100 For instance 2: accel-cmd -p <Instance 2 port> pppoe interface add ens4f1.200 accel-cmd -h Usage...
- 21 Mar 2024, 18:58
- Forum: L2TP
- Topic: L2TP and TCP throughput
- Replies: 1
- Views: 1650
Re: L2TP and TCP throughput
Hi, @tj-19.
To be honest you can not set mtu to 1500 for L2TP, because you can not garantee path between L2TP server and client. So you have to use clamping TCP MSS.
Also, I think you configure firewall for ICMP messages, that can broke network windows packets size and you will see this issue.
To be honest you can not set mtu to 1500 for L2TP, because you can not garantee path between L2TP server and client. So you have to use clamping TCP MSS.
Also, I think you configure firewall for ICMP messages, that can broke network windows packets size and you will see this issue.
- 21 Mar 2024, 18:49
- Forum: L2TP
- Topic: ACCEL-PPP with FRR router
- Replies: 7
- Views: 985
Re: ACCEL-PPP with FRR router
Imagine the foloowing topology https://raw.githubusercontent.com/DmitriyEshenko/tech-sup/master/topo1.png Trace from PPPoE Clinet traceroute 203.0.113.2 traceroute to 203.0.113.2 (203.0.113.2), 30 hops max, 60 byte packets 1 192.0.2.1 (192.0.2.1) 2.782 ms 1.527 ms 2.137 ms 2 192.0.2.2 (192.0.2.2) 4....
- 21 Mar 2024, 18:13
- Forum: General
- Topic: accel-ppp as pppoe client
- Replies: 3
- Views: 1784
Re: accel-ppp as pppoe client
Hi, accel-ppp only server side. You can tune your NIC (enable RSS and RPS) to perform your pppoe client.
- 09 Mar 2024, 07:42
- Forum: L2TP
- Topic: ACCEL-PPP with FRR router
- Replies: 7
- Views: 985
Re: ACCEL-PPP with FRR router
Hi @tj-19, I think does not possible to use ppp without GW in accel-ppp, this requir p2p route. Try to change GW to router IP address which you was in route path to client.
- 04 Mar 2024, 18:51
- Forum: IPoE
- Topic: Lua and Agent_Remote_ID
- Replies: 1
- Views: 1617
Re: Lua and Agent_Remote_ID
Hi, why do you use quotes as arg in func?
Try pkt:agent_circuit_id(). Also what about string unpacking?
Look Agent-Circuit-ID contain to match special characters including spaces d4c1.c812.1678 pon 1/1/16/3/01/1:1015
Try pkt:agent_circuit_id(). Also what about string unpacking?
Look Agent-Circuit-ID contain to match special characters including spaces d4c1.c812.1678 pon 1/1/16/3/01/1:1015
- 02 Mar 2024, 08:38
- Forum: L2TP
- Topic: ACCEL-PPP with FRR router
- Replies: 7
- Views: 985
Re: ACCEL-PPP with FRR router
Hi @tj-19, gw-ip-address in [radius] section required for p2p tunnels. You can use any not global routed IP for this like from 172.16.0.0/12, 10.0.0.0/8, 192.168.0.0/16... Accel-ppp supports Framed-Route, and it works a bit different then you thought. It add route to BRAS likle <Framed-IP-Route> via...
- 20 Dec 2023, 18:50
- Forum: Installation
- Topic: Compiling on Debian 12
- Replies: 5
- Views: 15837
Re: Compiling on Debian 12
In general it is not error, it is just warning about new openssl version. It will fixed
- 16 Oct 2023, 08:59
- Forum: Radius
- Topic: unable to send Mikrotik-Delegated-IPv6-Pool to AAA
- Replies: 6
- Views: 16856
Re: unable to send Mikrotik-Delegated-IPv6-Pool to AAA
Yes, it looks like this