accel-ppp.org

Hi @tj-19, at first check Access-Accept, why you send Framed-Route 0.0.0.0/0 0.0.0.0 1? As for "failed to set IPv4 address: File exists" it looks like sessions with this IP is not terminates in time. I propose you to play with [ppp] lcp params. Also, provide info how finished old sessions ...

Hi @tj-19, unfortunately LAC in accel-ppp is not implemented, only LNS

Hi. It looks like you did something wrong or I dont get you root@accel-ppp-dev:~# accel-cmd pppoe interface show interface: connections: state: ----------------------------------- root@accel-ppp-dev:~# accel-cmd pppoe interface add ens19 root@accel-ppp-dev:~# accel-cmd pppoe interface show interface...

RPS Configuration
https://docs.kernel.org/networking/scal ... figuration

RSS Configuration
https://docs.kernel.org/networking/scal ... figuration

For upload from client need additional tunning XPS as I remember

Hi, hashbang. For different instance you have to use different [CLI]tcp=127.0.0.1:port and use this port as arg for accel-cmd For instance 1: accel-cmd -p <Instance 1 port> pppoe interface add ens5f1.100 For instance 2: accel-cmd -p <Instance 2 port> pppoe interface add ens4f1.200 accel-cmd -h Usage...

Hi, @tj-19.

To be honest you can not set mtu to 1500 for L2TP, because you can not garantee path between L2TP server and client. So you have to use clamping TCP MSS.
Also, I think you configure firewall for ICMP messages, that can broke network windows packets size and you will see this issue.

Imagine the foloowing topology https://raw.githubusercontent.com/DmitriyEshenko/tech-sup/master/topo1.png Trace from PPPoE Clinet traceroute 203.0.113.2 traceroute to 203.0.113.2 (203.0.113.2), 30 hops max, 60 byte packets 1 192.0.2.1 (192.0.2.1) 2.782 ms 1.527 ms 2.137 ms 2 192.0.2.2 (192.0.2.2) 4....

Hi, accel-ppp only server side. You can tune your NIC (enable RSS and RPS) to perform your pppoe client.

Hi @tj-19, I think does not possible to use ppp without GW in accel-ppp, this requir p2p route. Try to change GW to router IP address which you was in route path to client.

Hi, why do you use quotes as arg in func?
Try pkt:agent_circuit_id(). Also what about string unpacking?
Look Agent-Circuit-ID contain to match special characters including spaces d4c1.c812.1678 pon 1/1/16/3/01/1:1015