Hi,
I'm doing tests with accel-ppp. Congratulations! Excellent software.
I have a question related to ipoe and ip-pool. Let's suppose I have this setting:
[ipoe]
verbose=5
check-mac-change=0
username=lua:username
lua-file=/etc/accel-ppp.lua
lease-time=600
renew-time=600
max-lease-time=3600
unit-cache=0
proxy-arp=1
gw-ip-address=192.168.0.1/24
interface=re:eth3\.668\.([1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-4][0-9][0-9][0-9]),mode=L2,shared=0,start=dhcpv4,ifcfg=1,ipv6=1
vlan-mon=eth3.668,1-4095
vlan-timeout=60
ip-pool=ipoe
[ip-pool]
gw-ip-address=192.168.0.1
attr=Framed-Pool
192.168.0.2/24,name=ipoe
4 clients connected and received the IPs:
192.168.0.2
192.168.0.3
192.168.0.4
192.168.0.5
Let's assume that the client 192.168.0.2 shutdown your router for more than 1 hour and another client connected. This new client should get IP 192.168.0.2, since it would be available through leased time. But what happens is that it receives IP 192.168.0.6.
In a scenario where we have public and private IP pools, it would be interesting that all public IPs were in use before we started using private IPs.
Would this idea be interesting?
Reuse IPs from the pool with leased time expired
Re: Reuse IPs from the pool with leased time expired
hi,
use new feature of git version:
[ipoe]
ip-pool=white
[ip-pool]
192.168.0.0/24,name=gray
1.1.1.0/24,name=white,next=gray
use new feature of git version:
[ipoe]
ip-pool=white
[ip-pool]
192.168.0.0/24,name=gray
1.1.1.0/24,name=white,next=gray
Re: Reuse IPs from the pool with leased time expired
Thanx Dmitry!!!
I'll test here and again, congratulations to the excellent software.
I'll test here and again, congratulations to the excellent software.