Hi,
Is it possible to have DHCP as well as non-DHCP client on IPOE interface, i.e. connect from any IP address, authentication from radius.
Thanks and regards
A Narayan
manual Client IP with no DHCP on IPOE interface
-
- Posts: 13
- Joined: 01 Dec 2015, 09:38
Re: manual Client IP with no DHCP on IPOE interface
hi,
yes
interface=eth0,start=up,start=dhcpv4
yes
interface=eth0,start=up,start=dhcpv4
-
- Posts: 13
- Joined: 01 Dec 2015, 09:38
Re: manual Client IP with no DHCP on IPOE interface
Hi,
Thanks Its working.
Regards
A Narayan
Thanks Its working.
Regards
A Narayan