Thx for reply
its realy very strange ... i've recompiled accel-ppp - same problem ... nothing in logs, then i've removed accel-ppp and installed from deb package that i've made on other server - again nothing in logs ...
ok... i have 1 more server with accel, and in there is version in logs but kernel errors too
root@ipoe:~# accel-pppd -c /etc/accel-ppp.conf
Logs
[2016-07-01 16:38:35]: debug: libnetlink: RTNETLINK answers: Operation not supported
[2016-07-01 16:38:35]: error: ipoe: nl_add_net: error talking to kernel
[2016-07-01 16:38:35]: debug: libnetlink: RTNETLINK answers: Invalid argument
[2016-07-01 16:38:35]: error: ipoe: nl_del_iface: error talking to kernel
[2016-07-01 16:38:35]: debug: libnetlink: RTNETLINK answers: Operation not supported
[2016-07-01 16:38:35]: error: ipoe: nl_add_iface: error talking to kernel
[2016-07-01 16:38:35]: info: ipoe: start interface ens3:0 ()
[2016-07-01 16:38:35]: debug: libnetlink: RTNETLINK answers: Invalid argument
[2016-07-01 16:38:35]: error: ipoe: nl_del_net: error talking to kernel
[2016-07-01 16:38:35]: debug: libnetlink: RTNETLINK answers: Invalid argument
[2016-07-01 16:38:35]: error: ipoe: nl_add_net: error talking to kernel
[2016-07-01 16:38:35]: debug: libnetlink: RTNETLINK answers: Invalid argument
[2016-07-01 16:38:35]: error: ipoe: nl_del_vlan_mon: error talking to kernel
[2016-07-01 16:38:35]: msg: accel-ppp version 1.10.2
config if needed:
Спойлер
Code: Select all
[modules]
log_file
log_syslog
ipoe
auth
auth_mschap_v2
auth_mschap_v1
auth_chap_md5
auth_pap
radius
shaper
[core]
log-error=/var/log/accel-ppp/core.log
thread-count=4
[common]
[log]
log-file=/var/log/accel-ppp/accel-ppp.log
log-emerg=/var/log/accel-ppp/emerg.log
log-fail-file=/var/log/accel-ppp/auth-fail.log
copy=1
level=5
[auth]
any-login=1
[ipoe]
verbose=9
unit-cache=2000
shared=1
ifcfg=0
mode=L3
ip-unnumbered=1
proxy-arp=0
proto=100
local-net=10.0.0.0/8
start=up
interface=ens3:0
gw-ip-address=10.0.0.1/8
[radius]
nas-identifier=Accel-PPP
nas-ip-address=10.0.0.107
server=#RAD_IP,testing123,auth-port=1812,acct-port=1813,req-limit=50,fail-timeout=0,max-fail=10,weight=1
verbose=1
max-try=3
acct-timeout=120
acct-on=0
[shaper]
attr=Filter-Id
ifb=ifb0
up-limiter=htb
down-limiter=htb
cburst=1375000
r2q=10
quantum=1500
leaf-qdisc=sfq perturb 10
verbose=1
down-burst-factor=0.1
up-burst-factor=1.0
rate-multiplier=1
fwmark=1
verbose=1
[cli]
verbose=1
telnet=127.0.0.1:2000
tcp=127.0.0.1:2001
haven't found anything about this errors ... any ideas ?