Can't reload ip pool from config

Here you can post your feature requests and suggestions
Post Reply
hugleo
Posts: 59
Joined: 13 Apr 2016, 14:28

Can't reload ip pool from config

Post by hugleo »

If I type the reload comand into the cli:
telnet localhost 2000
reload

It's doesn't reload ip pool.

for example:

[ip-pool]
gw-ip-address=172.16.0.1
attr=Framed-Pool
#192.168.0.2-192.168.0.254

I commented the #192.168.0.2-192.168.0.254 line and pppoe client still get ip from current 192.168.0.2-192.168.0.254 pool.
I't will work only if I restarted the accel-ppp service.

Is it own from the implementation that require ip pool stay in memory?
Dmitry
Администратор
Posts: 954
Joined: 09 Oct 2014, 10:06

Re: Can't reload ip pool from config

Post by Dmitry »

ip-pool reload is not implemented
matrixnts
Posts: 2
Joined: 13 Apr 2016, 20:10

Re: Can't reload ip pool from config

Post by matrixnts »

Здравствуйте, есть в планах реализация этой функции ?
Dmitry
Администратор
Posts: 954
Joined: 09 Oct 2014, 10:06

Re: Can't reload ip pool from config

Post by Dmitry »

есть
matrixnts
Posts: 2
Joined: 13 Apr 2016, 20:10

Re: Can't reload ip pool from config

Post by matrixnts »

спасибо, будем ждать :)
Post Reply