I can not find file in log

Compilation and installation questions and stories
Post Reply
Alef
Posts: 5
Joined: 23 Jan 2018, 17:54

I can not find file in log

Post by Alef » 23 Jan 2018, 19:50

Hi guys,

There are no files in /var/log/accel-ppp/

Comment empty folder.

dimka88
Posts: 405
Joined: 13 Oct 2014, 05:51
Contact:

Re: I can not find file in log

Post by dimka88 » 23 Jan 2018, 19:55

Hi, show accel-ppp.conf section [log] and section [modules]. And show

Code: Select all

ls -la /var/log/accel-ppp

Alef
Posts: 5
Joined: 23 Jan 2018, 17:54

Re: I can not find file in log

Post by Alef » 23 Jan 2018, 20:14

Code: Select all

root@ubuntu:/home/ppp# ls -la /var/log/accel-ppp
total 8
drwxr-xr-x 2 root root   4096 Jan 23 09:10 .
drwxrwxr-x 9 root syslog 4096 Jan 23 09:10 ..

dimka88
Posts: 405
Joined: 13 Oct 2014, 05:51
Contact:

Re: I can not find file in log

Post by dimka88 » 23 Jan 2018, 20:38

Alef, and

Code: Select all

cat /etc/accel-ppp.conf
You run accel-pppd as root user?

Alef
Posts: 5
Joined: 23 Jan 2018, 17:54

Re: I can not find file in log

Post by Alef » 23 Jan 2018, 20:54

Code: Select all

[modules]
#path=/usr/local/lib/accel-ppp
log_file
pppoe
auth_mschap_v2
auth_mschap_v1
auth_chap_md5
auth_pap
radius
ippool

pppd_compat

shaper
#shaper_tbf (obsolete)
#chap-secrets


[core]
log-error=/var/log/accel-ppp/core.log
thread-count=4

[ppp]
verbose=1
min-mtu=1280
mtu=1400
mru=1400
#ccp=0
#sid-case=upper
#check-ip=0
#single-session=replace
#mppe=require
ipv4=require
ipv6=deny
ipv6-intf-id=0:0:0:1
ipv6-peer-intf-id=0:0:0:2
ipv6-accept-peer-intf-id=1
lcp-echo-interval=20
#lcp-echo-failure=3
lcp-echo-timeout=120
#unit-cache=1000

[auth]
#any-login=0
#noauth=0

[pptp]
#echo-interval=30
#mppe=allow
#ip-pool=pool1
verbose=1

[pppoe]
interface=ens33
#interface=eth1,padi-limit=1000
#ac-name=xxx
#service-name=yyy
#pado-delay=0
#pado-delay=0,100:100,200:200,-1:500
#ifname-in-sid=called-sid
#tr101=1
#padi-limit=0
#mppe=allow
#ip-pool=pool2
verbose=1

[l2tp]
#dictionary=/usr/local/share/accel-ppp/l2tp/dictionary
#hello-interval=60
#timeout=60
#rtimeout=5
#retransmit=5
#host-name=accel-ppp
#dir300_quirk=0
#secret=
#mppe=allow
#ip-pool=pool3
verbose=1

[dns]
dns1=172.16.98.3
dns2=4.2.2.4

[wins]
#wins1=172.16.0.1
#wins2=172.16.1.1

[radius]
#dictionary=/usr/local/share/accel-ppp/radius/dictionary
nas-identifier=accel-ppp
nas-ip-address=172.16.97.12
gw-ip-address=172.16.97.11
#auth-server=127.0.0.1:1812,testing123 (obsolete)
#acct-server=127.0.0.1:1813,testing123 (obsolete)
#server=127.0.0.1,testing123 (obsolete)
server=172.16.97.12,123,auth-port=1812,acct-port=1813,req-limit=0,fail-time=0
dae-server=172.16.97.12:3799,123
verbose=1
timeout=160
#max-try=3
#acct-timeout=120
#acct-delay-time=0

[client-ip-range]
disable

[ip-pool]
gw-ip-address=172.16.97.11
#vendor=Cisco
#attr=Cisco-AVPair
attr=Framed-Pool
100.100.0.2-255.name=pppoe


[log]
log-file=/var/log/accel-ppp/accel-ppp.log
log-emerg=/var/log/accel-ppp/emerg.log
log-fail-file=/var/log/accel-ppp/auth-fail.log
#log-debug=/dev/stdout
#syslog=accel-pppd,daemon
#log-tcp=127.0.0.1:3000
copy=1
#color=1
#per-user-dir=per_user
#per-session-dir=per_session
#per-session=1
level=3

[log-pgsql]
conninfo=user=log
log-table=log

[pppd-compat]
#ip-pre-up=/etc/ppp/ip-pre-up
ip-up=/etc/ppp/ip-up
ip-down=/etc/ppp/ip-down
ip-change=/etc/ppp/ip-change
radattr-prefix=/var/run/radattr
verbose=1

[chap-secrets]
gw-ip-address=172.16.97.11
chap-secrets=/etc/ppp/chap-secrets
#encrypted=0
#username-hash=md5

[shaper]
#attr=Filter-Id
#down-burst-factor=0.1
#up-burst-factor=1.0
#latency=50
#mpu=0
#mtu=0
#r2q=10
#quantum=1500
#cburst=1534
#ifb=ifb0
up-limiter=police
down-limiter=tbf
#leaf-qdisc=sfq perturb 10
verbose=1

#tbf is obsolete, use shaper module
#[tbf]
#attr=Filter-Id
#down-burst-factor=0.1
#up-burst-factor=1.0
#latency=50

[cli]
telnet=127.0.0.1:2000
tcp=127.0.0.1:2001
#password=123

[snmp]
master=0
agent-name=accel-ppp

[connlimit]
limit=10/min
burst=3
timeout=60

[ipv6-pool]
fc00:0:1::/48,64
delegate=fc00:1::/36,48

[ipv6-dns]
#fc00:1::1
#fc00:1::2
#fc00:1::3
#dnssl=suffix1.local.net
#dnssl=suffix2.local.net.

[ipv6-dhcp]
verbose=1
pref-lifetime=604800
valid-lifetime=2592000
route-via-gw=1
Yes.

dimka88
Posts: 405
Joined: 13 Oct 2014, 05:51
Contact:

Re: I can not find file in log

Post by dimka88 » 24 Jan 2018, 07:16

It's interesting, kill accel-pppd process if active and run

Code: Select all

accel-pppd -c /etc/accel-ppp.conf
and show output

ps:// This is production server or test stand?
Do you configured logrotate or deleted log files manually or log files dont create on start accel-ppd?

Alef
Posts: 5
Joined: 23 Jan 2018, 17:54

Re: I can not find file in log

Post by Alef » 24 Jan 2018, 14:18

I typed the command and did not bring any information.

It's a test server.

I did not configure it or erase it. I believe it was not created in the installation.

How do I see if it is active?

dimka88
Posts: 405
Joined: 13 Oct 2014, 05:51
Contact:

Re: I can not find file in log

Post by dimka88 » 24 Jan 2018, 14:51

I did not configure it or erase it. I believe it was not created in the installation.
files create after accl-pppd starting.
How do I see if it is active?

Code: Select all

ps ax | grep accel-ppp

Alef
Posts: 5
Joined: 23 Jan 2018, 17:54

Re: I can not find file in log

Post by Alef » 24 Jan 2018, 16:05

Result of ps aux | grep accel-ppp

Code: Select all

 1137 pts/0    S+     0:00 grep --color=auto accel-ppp
I have reset installation and now it shows the log files.

Look at this log, I already checked ippool.

Code: Select all

root@ubuntu:/etc/ppp# tail -f /var/log/accel-ppp/accel-ppp.log 
[2018-01-24 06:11:34]: error: ippool: open (null): Bad address
[2018-01-24 06:11:34]:   msg: accel-ppp version 1.7.4
[2018-01-24 06:11:43]: error: ippool: open (null): Bad address
[2018-01-24 06:11:43]:   msg: accel-ppp version 1.7.4

dimka88
Posts: 405
Joined: 13 Oct 2014, 05:51
Contact:

Re: I can not find file in log

Post by dimka88 » 24 Jan 2018, 16:35

1.7.4 is a very old version, please get accel-ppp on master tree from git

Code: Select all

git clone https://git.code.sf.net/p/accel-ppp/code accel-ppp-code
and dont run

Code: Select all

git checkout -b 1.7 --track origin/1.7
https://translate.google.com/translate? ... ompilation

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest