Page 1 of 1

PPTP bind parameters

Posted: 08 May 2020, 05:58
by h3ll1
Hello,
is it possible to configure [pptp] module to bind to more than 1 IP address in config file: eg bind=10.0.0.1,10.0.1.1 etc...?

Re: PPTP bind parameters

Posted: 10 May 2020, 08:30
by dimka88
Hello,
If you don't set `bind=` at all, accel-ppp will bind on all, e.g. `0.0.0.0`
Possible define only one bind ip address or delete bind option for listening pptp on all ip addresses