Problem ipv6 gateway
Posted: 20 Mar 2019, 20:19
I researched here in the forum but did not find information about what I'm going to ask.
Is there any further detail to be configured for IPv6 to work correctly in PPPoE sessions?
I performed the configuration and there were two situations. In routers (cpe) Mikrotik the configuration works normally. But in routers (cpe) of the tp-link brand does not. It happens that the prefixes are delivered normally, including the DNSv6 server settings, but the V6 Gateway is not delivered either to the CPE itself or to the hosts behind this CPE.
The following is the IPv6 configuration:
Note: The above IPv6 are fictitious.
Regards.
Thanks.
Is there any further detail to be configured for IPv6 to work correctly in PPPoE sessions?
I performed the configuration and there were two situations. In routers (cpe) Mikrotik the configuration works normally. But in routers (cpe) of the tp-link brand does not. It happens that the prefixes are delivered normally, including the DNSv6 server settings, but the V6 Gateway is not delivered either to the CPE itself or to the hosts behind this CPE.
The following is the IPv6 configuration:
Code: Select all
ipv6_nd
ipv6_dhcp
ipv6pool
Code: Select all
[ppp]
verbose=1
min-mtu=1452
mtu=1492
mru=1492
ipv4=require
ipv6=allow
ipv6-intf-id=random
ipv6-peer-intf-id=random
ipv6-accept-peer-intf-id=1
lcp-echo-interval=20
lcp-echo-failure=2
#lcp-echo-timeout=60
unit-cache=1
ccp=0
[ipv6-pool]
2001:12ff:11::/48,64
delegate=2001:12ff:12::/48,64
[ipv6-dns]
2001:12ff::8
2001:12ff::10
[ipv6-dhcp]
verbose=3
pref-lifetime=604800
valid-lifetime=2592000
route-via-gw=1
Regards.
Thanks.