Hi
I would like to know if it is possible - as long as available - to reuse the same IP address for the same client.
In fact, during the tests I noticed that at each re-authentication with a single router, this always received the next IP address of the pool, even when the address used previously was still available.
Thanks
Marco
Reuse IPs from the pool
Re: Reuse IPs from the pool
Hello @marco, usually most ISPs do it via the RADIUS server attribute Framed-IP-Address. Accel-ppp developers are not tried to implement this feature, because it unusefull
Re: Reuse IPs from the pool
Ho dimka88
Keeping the same dynamic IP allows customers to continue doing what they were doing without reopening new sessions e.g. while checking their emails on the web ...
On hiperlan link CPE disconnection can be frequent and reuse the same IP address is very useful...
Keeping the same dynamic IP allows customers to continue doing what they were doing without reopening new sessions e.g. while checking their emails on the web ...
On hiperlan link CPE disconnection can be frequent and reuse the same IP address is very useful...
Re: Reuse IPs from the pool
Yes, understand. But ISPs usually do this logic on RADIUS server-side, because it is more flexible.
Re: Reuse IPs from the pool
Hi dimka88
You have right. We also use static ip address on RADIUS side server for some clients, but problem is to have ipv4 public address pools...
Thank for you reply.
P.S. Accel-ppp works very well
You have right. We also use static ip address on RADIUS side server for some clients, but problem is to have ipv4 public address pools...
Thank for you reply.
P.S. Accel-ppp works very well