Привет
Есть пара вопросов, явных ответов на которые не нашёл.
1: как рботает команда reload, что именно можно перегрузить с её помощью ?
2: как работает логер ?
Касаемо второго вопроса есть следующая ситуация: в конфиге прописано писать лог в файл и в syslog. Основным по задумке должен быть syslog, и некоторые особенности выводить в файлы (log-emerg и log-fail-file). Итоговая конфигурация выглядит так:
Спойлер
Code: Select all
[modules]
log_file
# log_tcp
# log_pgsql
log_syslog
pptp
pppoe
#ipoe
#l2tp
# auth_pap
auth_mschap_v2
auth_mschap_v1
auth_chap_md5
#chap-secrets
radius
ippool
# ipv6pool
sigchld
pppd_compat
shaper
# net-snmp
# logwtmp
# connlimit
[core]
# Path to file for core module error logging
log-error=/var/log/accel-ppp/error.log
# Number of working threads, optimal - number of processors/cores
thread-count=4
[log]
# Path to file to write general log
log-file=/var/log/accel-ppp/general.log
# Path to file to write emergency messages
log-emerg=/var/log/accel-ppp/emerg.log
# Path to file to write authentication failed session log
log-fail-file=/var/log/accel-ppp/auth.log
# Send logs to specified host
# log-tcp=x.x.x.x:port
# Send logs to system logger. Facility may be: daemon, local0-local7 or numeric value
syslog=accel-pppd,daemon
# If this options is given and greater then zero logging engine will duplicate session log in general log.
# (Useful when per-session/per-user logs are not used)
#copy=1
# Directory for session logs. If specified each session will be logged separately to file which name is unique session identifier
# per-session-dir=dir
# Directory for user logs. If specified all sessions of same user will be logged to file which name is user name
# per-user-dir=dir
# If specified and n is greater then zero each session of same user will be logger separately to directory specified
# by "per-user-dir" and subdirectory which name is user name and to file which name os unique session identifier
# per-session=n
# Specifies log level which values are:
# 0 turn off all logging
# 1 log only error messages
# 2 log error and warning messages
# 3 log error, warning and minimum information messages (use this level in conjuction with verbose option of other modules if you need
# verbose logging)
# 4 log error, warning and full information messages (use this level in conjuction with verbose option of other modules if you need
# verbose logging)
# 5 log all messages including debug messages
level=3
Теперь о "ньюансе" - как я уже говорил выше, основная информация должна направляться в syslog и некоторая дополнительная в файлы. Следовательно опция log-file была закоментирована. Команда reload не помогла, пришлось перестартовать сервис целиком. И пришлось наблюдать следующее:
Code: Select all
Aug 23 20:40:45 obl kernel: [36070.034467] accel-pppd[5534]: segfault at 20 ip 00007f2f78ef0bd0 sp 00007fff928a5098 error 6 in libpthread-2.19.so[7f2f78ee400
Отсюда и вопрос - это баг или так и задумано ?
P.S. Версия accel-я
Code: Select all
Aug 23 20:51:41 obl accel-pppd: accel-ppp version 810d23477a9ca33dfa2379c3fc742c3c56df3a9d