Hi,
I'd got 2 instances running.
instance 1 : ens5f1
instance 2 : ens4f1
On instance 2 i cannot add pppoe interface from accel-cmd. It accepts the command but no interface in show command. If u add the interface in conf file and restart the service. It adds the ppooe server on interface. Regular expression seems to be working. on 2nd instance in interface=re:ens4f1\.[1-1000]. Please assist
ty
cannot add pppoe interface in cli
Re: cannot add pppoe interface in cli
Hi, hashbang.
For different instance you have to use different [CLI]tcp=127.0.0.1:port and use this port as arg for accel-cmd
For instance 1:
accel-cmd -p <Instance 1 port> pppoe interface add ens5f1.100
For instance 2:
accel-cmd -p <Instance 2 port> pppoe interface add ens4f1.200
For different instance you have to use different [CLI]tcp=127.0.0.1:port and use this port as arg for accel-cmd
For instance 1:
accel-cmd -p <Instance 1 port> pppoe interface add ens5f1.100
For instance 2:
accel-cmd -p <Instance 2 port> pppoe interface add ens4f1.200
Code: Select all
accel-cmd -h
Usage: accel-cmd [-v] [-4] [-6] [-n] [-f FAMILY] [-H HOST] [-p PORT] [-t TIMEOUT] [COMMAND]
-f, --family - Set protocol family to use for communicating with HOST. FAMILY can be set to "inet" (IPv4), "inet6" (IPv6) or "unspec" (automatic).
-4 - Shortcut for --family=inet.
-6 - Shortcut for --family=inet6.
-n, --numeric - Avoid name resolution for HOST and PORT.
-H, --host - Set hostname, or IP address, to communicate with. Defaults to "localhost".
-p, --port - Set remote port to use for communicating with HOST. Defaults to "2001".
-t, --timeout - Set inactivity timeout.
-P, --password - Set password for accessing HOST.
-v, --verbose - Verbose output.
-V, --version - Display version number and exit.
-h, --help - Display this help message and exit.
COMMAND is the accel-ppp command line to be executed (if omitted, commands are read from standard input).
The "help" command can be used (e.g. "accel-cmd help") to get information about available commands and their syntax.
Re: cannot add pppoe interface in cli
ty,
they are on different ports
accel-cmd -p 2002 pppoe interface add enp2s0f1.203
accel-cmd -p 2002 pppoe interface show
interface: connections: state:
-----------------------------------
enp2s0f1 0 active
in conf file
interface=enp2s0f1
if i change this to regular expression
interface=re:enp2s0f1\.
then it adds in cli
thanks
they are on different ports
accel-cmd -p 2002 pppoe interface add enp2s0f1.203
accel-cmd -p 2002 pppoe interface show
interface: connections: state:
-----------------------------------
enp2s0f1 0 active
in conf file
interface=enp2s0f1
if i change this to regular expression
interface=re:enp2s0f1\.
then it adds in cli
thanks