Hello guys!
I'm checked that the proccess taken too long time to 'die' after stop service. If i 'kill' proccess It generate 'defunct' in proccess, and after same minutes (about 2 ~ 3 minutes) It close.
This is normal?
Daemon problem at stop
Re: Daemon problem at stop
Hi, what accel-ppp version you use?
How many active session when you stop service?
Code: Select all
accel-cmd -V
Re: Daemon problem at stop
Hi,
I'm using latest (from git), but all before this, same behavior.
About amount of sessions, indifferent, se tiver 300 or 2500, it's the same.
I'm using latest (from git), but all before this, same behavior.
About amount of sessions, indifferent, se tiver 300 or 2500, it's the same.
Re: Daemon problem at stop
kernel slowly destroy ppp interfaces, process will be in defunct state until all interfaces will be destoryed
which kernel version ?
which kernel version ?
Re: Daemon problem at stop
I tested it on 4 different kernel versions, 3.2, 3.10, 3.16 and 4.9. In both the problem occur. However I followed the progress, and the instant I stop the daemon, all ppp interfaces disappear, but the process gets "on", then if I kill it, the "defunct" occurs.
Re: Daemon problem at stop
ok i'll check
Re: Daemon problem at stop
@andlui9
try latest version from git - latest version (1.11, 1.12) have fix with radius queue.
I tested on my production server and problem of restart daemon fixed - now about 15-16 sec (about 600 sessions ipoe+pppoe)
try latest version from git - latest version (1.11, 1.12) have fix with radius queue.
I tested on my production server and problem of restart daemon fixed - now about 15-16 sec (about 600 sessions ipoe+pppoe)