LUA in IPOE

IPoE related questions
Post Reply
rodrigoselau
Posts: 12
Joined: 13 Nov 2018, 12:32

LUA in IPOE

Post by rodrigoselau » 06 Dec 2018, 18:50

good afternoon guys, I'm facing a little problem,
Some onu'ssend their serial with the following format FHTT-XXXXXX and others send without the "-" ... would like to always send them with the "-" in the file lua, would have perform?

rodrigoselau
Posts: 12
Joined: 13 Nov 2018, 12:32

Re: LUA in IPOE

Post by rodrigoselau » 06 Dec 2018, 18:51

my accel-ppp.lua file:


function username(pkt)
return pkt:agent_circuit_id('')
end

dimka88
Posts: 461
Joined: 13 Oct 2014, 05:51
Contact:

Re: LUA in IPOE

Post by dimka88 » 06 Dec 2018, 20:59

Hi, try this

Code: Select all

function username(pkt)
       acid=pkt:agent_circuit_id()
        if(string.sub(acid, 5, 5) ~= "-") then
                modAcid=string.sub(acid, 0, 4) .. "-" .. string.sub(acid, 5)
                return modAcid
        else
                return acid
        end
end
OR

Code: Select all

function username(pkt)
       acid=pkt:agent_circuit_id()
        if(string.sub(acid, 5, 5) ~= "-") then
               modAcid=string.gsub(acid, "FTTH", "FTTH-")
                return modAcid
        else
                return acid
        end
end

rodrigoselau
Posts: 12
Joined: 13 Nov 2018, 12:32

Re: LUA in IPOE

Post by rodrigoselau » 07 Dec 2018, 11:47

in some worked others not ... I think it's because my circuit id is olt card number / port number olt / serial onu for example I have two scenarios ... 14/2 / FHTT-XXXXX and 13/16 / PRKS- XXXXX

rodrigoselau
Posts: 12
Joined: 13 Nov 2018, 12:32

Re: LUA in IPOE

Post by rodrigoselau » 07 Dec 2018, 12:43

What would this script do?

Code: Select all

function username(pkt)
        acid=pkt:agent_circuit_id()
        if(string.sub(acid, 5, 5) ~= "-") then
                modAcid1=string.gsub(acid, "(FHTT)", "%1-")
                return modAcid1
         elseif(string.sub(acid, 5, 5) ~= "-") then
                modAcid2=string.gsub(acid, "(FHTT-)", "%1-")
                return modAcid2
         elseif(string.sub(acid, 5, 5) ~= "-") then
                modAcid3=string.gsub(acid, "(PRKS)", "%1-")
        else
                return acid
        end
end

dimka88
Posts: 461
Joined: 13 Oct 2014, 05:51
Contact:

Re: LUA in IPOE

Post by dimka88 » 07 Dec 2018, 12:50

show me more agent_circuit_id "LIKE 13/16 / PARKS- XXXXX" and result what are you need

rodrigoselau
Posts: 12
Joined: 13 Nov 2018, 12:32

Re: LUA in IPOE

Post by rodrigoselau » 07 Dec 2018, 12:59

My log accel-ppp

Code: Select all

[2018-12-07 10:55:41]:  info: IPoE-826: send [RADIUS(1) Accounting-Request id=1 <User-Name "13/2/FHTT06ef7e10"> <NAS-Identifier "IPoE"> <NAS-IP-Address 172.19.2.22> <NAS-Port 2002> <NAS-Port-Id "IPoE-826"> <NAS-Port-Type Ethernet> <Calling-Station-Id "18:0d:2c:18:6c:11"> <Called-Station-Id "eth0.1300"> <DHCP-Option82 > <Acct-Status-Type Start> <Acct-Authentic RADIUS> <Acct-Session-Id "dfa706c01a0c5cff"> <Acct-Session-Time 0> <Acct-Input-Octets 0> <Acct-Output-Octets 0> <Acct-Input-Packets 0> <Acct-Output-Packets 0> <Acct-Input-Gigawords 0> <Acct-Output-Gigawords 0> <Framed-IP-Address 45.228.117.233>]
[2018-12-07 10:55:41]:  info: IPoE-826: send [DHCPv4 Ack xid=39716f01 yiaddr=45.228.117.233 chaddr=18:0d:2c:18:6c:11 <Message-Type Ack> <Server-ID 172.19.2.22> <Lease-Time 100> <T1 300> <Router 172.19.2.22> <Subnet 255.255.255.255> <DNS 177.67.32.2,8.8.8.8>]
[2018-12-07 10:55:41]: debug: IPoE-826: radius(1): req_exit 0
[2018-12-07 10:55:41]:  info: IPoE-826: recv [RADIUS(1) Accounting-Response id=1]
[2018-12-07 10:55:41]:  info: IPoE-826: ipoe: session started
[2018-12-07 10:55:42]:  info: IPoE-133: recv [DHCPv4 Request xid=42549ebb ciaddr=45.228.117.213 chaddr=c4:71:54:53:f1:91 <Message-Type Request> <Max-Message-Size 1024> <Client-ID 01c4715453f191> <Host-Name NETSLIM> <Vendor-Class 4d53465420352e30> <Request-List Subnet,Router,DNS,Domain-Name,Vendor-Specific,44,46,47,66,Route,Classless-Route,249> <Relay-Agent {Agent-Circuit-ID 13/11/PRKS00bd6fc8} {Agent-Remote-ID }>]
[2018-12-07 10:55:42]:  info: IPoE-133: send [DHCPv4 Ack xid=42549ebb ciaddr=45.228.117.213 yiaddr=45.228.117.213 chaddr=c4:71:54:53:f1:91 <Message-Type Ack> <Server-ID 172.19.2.22> <Lease-Time 100> <T1 300> <Router 172.19.2.22> <Subnet 255.255.255.255> <DNS 177.67.32.2,8.8.8.8>]
[2018-12-07 10:56:10]:  info: IPoE-263: ipoe: session timed out
[2018-12-07 10:56:10]: debug: IPoE-263: terminate
[2018-12-07 10:56:10]: debug: IPoE-263: radius(1): req_enter 1
[2018-12-07 10:56:10]:  info: IPoE-263: send [RADIUS(1) Accounting-Request id=1 <User-Name "14/3/FHTT-091a2200"> <NAS-Identifier "IPoE"> <NAS-IP-Address 172.19.2.22> <NAS-Port 1995> <NAS-Port-Id "IPoE-263"> <NAS-Port-Type Ethernet> <Calling-Station-Id "18:0d:2c:18:6c:17"> <Called-Station-Id "eth0.1300"> <DHCP-Option82 > <Acct-Status-Type Stop> <Acct-Authentic RADIUS> <Acct-Session-Id "ec1b98bb7b7daa74"> <Acct-Session-Time 102> <Acct-Input-Octets 0> <Acct-Output-Octets 972> <Acct-Input-Packets 0> <Acct-Output-Packets 14> <Acct-Input-Gigawords 0> <Acct-Output-Gigawords 0> <Framed-IP-Address 45.228.117.211> <Acct-Terminate-Cause Lost-Carrier>]
I needed all the agent_cirquit_id to have the "-" so that there was no divergence ... could be different, if I had to remove all the "-" agents_circuit_id already solved the problem, because this only happens with the FHTT

dimka88
Posts: 461
Joined: 13 Oct 2014, 05:51
Contact:

Re: LUA in IPOE

Post by dimka88 » 07 Dec 2018, 13:06

try this for remove "-"

Code: Select all

function username(pkt)
	acid=pkt:agent_circuit_id()
	modAcid=string.gsub(acid, "-", "")
	return modAcid
end

rodrigoselau
Posts: 12
Joined: 13 Nov 2018, 12:32

Re: LUA in IPOE

Post by rodrigoselau » 07 Dec 2018, 14:43

Thanks that worked

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest