So I had put accel-ppp live with heavy load
Re: So I had put accel-ppp live with heavy load
No, I think for 32. Can you show `perf top` screenshot. What in accel-ppp logs and dmesg? Provide please also `accel-cmd show stat`
Re: So I had put accel-ppp live with heavy load
i think the problem is this. frr user using ping command lots of time. Dont know why frr (zebra and ospfd) using ping so much.
thnxRe: So I had put accel-ppp live with heavy load
Hi @hashbang, I don't know about frr ping command, but I think you can make some things. Try set in section [ppp] param unit-cache=3000 and then execute `accel-cmd reload`
from docs https://accel-ppp.readthedocs.io/en/lat ... n/ppp.html
from docs https://accel-ppp.readthedocs.io/en/lat ... n/ppp.html
unit-cache=n
By default is disabled: unit-cache=0
Specifies number of interfaces to keep in cache. It means that don’t destroy interface after corresponding session is destroyed, instead place it to cache and use it later for new sessions repeatedly. This should reduce kernel-level interface creation/deletion rate lack.
Re: So I had put accel-ppp live with heavy load
Hi,
here is a screenshot I forgot earlier to post. It show high cpu usage by accel-pppd + ping to ospf network by user frr. The first row showing accel-ppp consuming 78% cpu No idea is it accel-ppp or frr problem.
here is a screenshot I forgot earlier to post. It show high cpu usage by accel-pppd + ping to ospf network by user frr. The first row showing accel-ppp consuming 78% cpu No idea is it accel-ppp or frr problem.
Re: So I had put accel-ppp live with heavy load
Did you check journalctl and dmesg? What about accel-ppp.log and accel-cmd show stat?
Re: So I had put accel-ppp live with heavy load
i think this problem is caused by frr. Next time i'lll check all the parameters and post
ty
ty
Re: So I had put accel-ppp live with heavy load
As alternate routing daemon, you can use `bird`, that is an idea to confirm/decline that issue exactly with FRR
Re: So I had put accel-ppp live with heavy load
Hi
ty,
Somemore inputs again had problem today
journalctl doesnt show anything worth to be mentioned
dmesg all showing pppoe renamed to xxx
but something more to be given importance 30k connections on finish states
accel-cmd show sessions | grep finish | wc -l
30363
I just restarted the services
screenshots attached :
ty,
Somemore inputs again had problem today
journalctl doesnt show anything worth to be mentioned
dmesg all showing pppoe renamed to xxx
but something more to be given importance 30k connections on finish states
accel-cmd show sessions | grep finish | wc -l
30363
I just restarted the services
screenshots attached :
Re: So I had put accel-ppp live with heavy load
Try to set '[radius]acct-timeot=0` and server=.....req-limit=0 in case if rodius does not responding.
Can you also provide your [radius] section?
Can you also provide your [radius] section?