Hi,
I'd enabled snmp with net-snmpd as master agent. This was for my AAA to get online information. After enabling snmp, accel-pppd freezes and stops everything. Service is up. accel-cmd show stat command freezes, logs stops. Disabling the snmp (net-snmpd) and everything starts to work again.
thanks and regards
enabling snmp freezes accel-ppd after sometimes
Re: enabling snmp freezes accel-ppd after sometimes
Hi,
The problem seems to with many interfaces going up suddenly or total number interfaces is high to handle. Till 200+ users its ok but if the users are much higher 300 to 1k > then accel-pppd hangs.
No stats, no logs but already online users are running.
thanks and regards
The problem seems to with many interfaces going up suddenly or total number interfaces is high to handle. Till 200+ users its ok but if the users are much higher 300 to 1k > then accel-pppd hangs.
No stats, no logs but already online users are running.
thanks and regards
Re: enabling snmp freezes accel-ppd after sometimes
Hello @hashbang, did you try to enable [ppp]unit-cache=n?
Re: enabling snmp freezes accel-ppd after sometimes
ty,
yes its already done.
thanks and regards
yes its already done.
thanks and regards
Re: enabling snmp freezes accel-ppd after sometimes
Hi,
Finally testing on 2 distro I found snmp freezes accel-ppp. Its neither dead or alive. I tested on fedora 33 on net-snmp 5.9 on which you can limit the number of interfacess (just limit to 1 int). I was running in master=0. Trying master=1 but getting
(Config search path: /etc/snmp:/usr/share/snmp:/usr/lib64/snmp)
It's unlikely this agent can serve any useful purpose in this state.
Run "snmpconf -g basic_setup" to help you configure the accel-ppp.conf file for this agent.
snmp is configured with rocommunity and address
master=1
#agent-name=accel-ppp
rocommunity snmpcommunity localhost
cannot walk
its listening on port 161 but no application attached to it :
udp 0 0 0.0.0.0:161 0.0.0.0:* -
please give the info how to run in master mode
thanks and regards
Finally testing on 2 distro I found snmp freezes accel-ppp. Its neither dead or alive. I tested on fedora 33 on net-snmp 5.9 on which you can limit the number of interfacess (just limit to 1 int). I was running in master=0. Trying master=1 but getting
(Config search path: /etc/snmp:/usr/share/snmp:/usr/lib64/snmp)
It's unlikely this agent can serve any useful purpose in this state.
Run "snmpconf -g basic_setup" to help you configure the accel-ppp.conf file for this agent.
snmp is configured with rocommunity and address
master=1
#agent-name=accel-ppp
rocommunity snmpcommunity localhost
cannot walk
its listening on port 161 but no application attached to it :
udp 0 0 0.0.0.0:161 0.0.0.0:* -
please give the info how to run in master mode
thanks and regards