Radius accounting problems
Posted: 24 Mar 2021, 22:42
Users are able to connect to L2TP/ Accel-ppp and Radius provides IP address etc.
However, Radius accounting fails and the session is then terminated after 3 tries.
With the following cause code:- <Acct-Terminate-Cause NAS-Error>]
In the Accel-PPP logs I see the following: - ( IP addresses changed for security)
[2021-03-24 22:16:46]: info: l2tp0: send [RADIUS(1) Accounting-Request id=1 <User-Name "test@test.com"> <NAS-Identifier "test"> <NAS-IP-Address 10.10.10.100> <NAS-Port 0> <NAS-Port-Id "l2tp0"> <NAS-Port-Type Virtual> <Service-Type Framed-User> <Framed-Protocol PPP> <Calling-Station-Id "192.168.10.193"> <Called-Station-Id "10.10.10.100"> <Acct-Status-Type Start> <Acct-Authentic RADIUS> <Acct-Session-Id "4262ded4dfdeb331"> <Acct-Session-Time 0> <Acct-Input-Octets 0> <Acct-Output-Octets 0> <Acct-Input-Packets 0> <Acct-Output-Packets 0> <Acct-Input-Gigawords 0> <Acct-Output-Gigawords 0> <Framed-IP-Address 192.168.11.50>]
[2021-03-24 22:16:49]: warn: l2tp0: radius: server(1) not responding
[2021-03-24 22:16:49]: warn: l2tp0: radius: no available servers
In the accel-ppp config I have acct-on=0 set to stop radius accounting.
But Accel-ppp still appears to be sending accounting requests.
In daloRADIUS I can see the accounting requests logging ok.
So daloRADIUS appears to be fine.
Any ideas where to look and how to further diagnose this issue?
However, Radius accounting fails and the session is then terminated after 3 tries.
With the following cause code:- <Acct-Terminate-Cause NAS-Error>]
In the Accel-PPP logs I see the following: - ( IP addresses changed for security)
[2021-03-24 22:16:46]: info: l2tp0: send [RADIUS(1) Accounting-Request id=1 <User-Name "test@test.com"> <NAS-Identifier "test"> <NAS-IP-Address 10.10.10.100> <NAS-Port 0> <NAS-Port-Id "l2tp0"> <NAS-Port-Type Virtual> <Service-Type Framed-User> <Framed-Protocol PPP> <Calling-Station-Id "192.168.10.193"> <Called-Station-Id "10.10.10.100"> <Acct-Status-Type Start> <Acct-Authentic RADIUS> <Acct-Session-Id "4262ded4dfdeb331"> <Acct-Session-Time 0> <Acct-Input-Octets 0> <Acct-Output-Octets 0> <Acct-Input-Packets 0> <Acct-Output-Packets 0> <Acct-Input-Gigawords 0> <Acct-Output-Gigawords 0> <Framed-IP-Address 192.168.11.50>]
[2021-03-24 22:16:49]: warn: l2tp0: radius: server(1) not responding
[2021-03-24 22:16:49]: warn: l2tp0: radius: no available servers
In the accel-ppp config I have acct-on=0 set to stop radius accounting.
But Accel-ppp still appears to be sending accounting requests.
In daloRADIUS I can see the accounting requests logging ok.
So daloRADIUS appears to be fine.
Any ideas where to look and how to further diagnose this issue?